Random Nomz
FJ Cruiser Fog Light Mounting Brackets - Bumper Wing Replacement - Off-Road Accessory
FJ Cruiser Fog Light Mounting Brackets - Bumper Wing Replacement - Off-Road Accessory
Couldn't load pickup availability
Clean up the front end of your FJ and mount 5" pod-style fog lights in the factory bumper “wing” location with a set of 3D printed Left + Right brackets.
IMPORTANT — PLEASE READ
Preinstalled Fog Lights
- Lights are a pair of yellow fogs - 50W. Final wiring step required: tie in 3 wires to power, ground, and a switch trigger.
- Come preinstalled with M6x25 Black screws with lock washers
- Use your own hardware to mount to the vehicle
- Minor trimming/cutting is required to the bumper wing area for proper fitment (common for this install style).
Bracket Only
-(1) Left bracket
-(1) Right bracket
-Brackets only (no lights / no hardware)
- Minor trimming/cutting is required to the bumper wing area for proper fitment (common for this install style).
Recommended lights (designed around these)
-These brackets were designed around this Amazon 5" pod light option:
https://a.co/d/aeXvnNy
-Using a different 5" pod may work, but fit can vary by housing shape and mounting point.
Install / forum reference (highly recommended)
-Install discussion + community reference here:
https://www.fjcruiserforums.com/threads/wing-delete-lamp-bracket.764303/
Material & build
-Printed in PETG for durability and outdoor use.
Install notes
-Basic hand tools required. You’ll test-fit, mark the bumper wing area, do a small trim, then bolt the lights to the brackets. Take your time on trimming for the cleanest OEM-style look.
Notes
-3D printed parts may show subtle layer lines (normal), but fit and function are the priority.
Attribution: Based on “FJ Cruiser Fog Light Bracket” by MikeBe (CC BY 4.0) — https://www.thingiverse.com/thing:4426960
Share
Great quality, does as advertised. Only downside is the lack of high-end 5" round fogs. I ended up going w Auxbeam, they have a nicer option than the $30 brands.
The package arrived, packed well and everything intact. The quality is excellent, and although my plan was to paint them, I kept them as they are because the printed material has a great look already, very nice!
Install was pretty straight forward for any FJ DIYer..remove the grill, then the bumper fascia. There was no template provided, so I made one from masking tape, and used a jigsaw to make quick work of cutting the hole. You will also need to source out the flathead fasteners prior to installing.
Now these brackets have more of a flat contour than the curved FJ bumper fascia, so they don’t quite follow the curve to a tee, making a slight gap at the front corner . It would be neat if the printed part had the same contour, or a fifth screw hole at the centre of the front. Another nice feature to incorporate into the print would be to have a curved “slot” for one of the light mount holes, in order to have the ability to aim the lights up or down. Maybe it’s something to consider in future prints.
Overall, I still give it 5 stars because they’re really that good!! And the service was great as well! Thank-you for making these available to us! Highly recommend these to every FJ driver out there.
